OPEN CHANNEL FLOW METER
OCF 5.0


OCF 5.0 Open Channel Flow Meter

  • Non-Contacting Ultrasonic Sensor
  • Accurate and Verifiable
  • Easy Data Logger Downloads via USB Output to Flash Drives
  • Built-in 2 Million point Data Logger
  • RS232 Serial Output and Windows Software
  • Isolated 4-20mA/0-5V Output
  • Built-In Totalizer
  • Retains Memory during Power Interruptions
  • On-screen Flow Reports
  • Password Protected
  • Simple 5-key Calibration
  • MANUFACTURER: Greyline Instruments

The OCF 5.0 uses a non-contacting ultrasonic sensor mounted over a flume or weir to measure flow. It is accurate, reliable and verifiable. The separate, watertight electronics/display enclosure can be mounted within 500 ft (150 m) of the sensor. The OCF 5.0 continuously displays, totalizes, transmits and data logs open channel flow. 

Use the built-in keypad for fast, easy calibration with menu selection of flume or weir and measurement units (e.g. gallons, liters etc.) Calibration values and data logs are password-protected and retained during power interruptions. The OCF 5.0 will display on-screen flow reports with daily total, minimum, maximum and average flow and will transfer data logs to a USB flash drive. PC software is included. 

PLEASE CLICK HERE TO CONTACT DELTA FOR PRICING AND SIZING INFORMATION

Copyright © 2011 Greyline Instruments Inc. All rights reserved. Information in this document is subject to change without notice.


PLEASE CLICK HERE TO RETURN TO OUR HOME PAGE